The LD type 3-ton electric single-girder bridge crane (hereinafter referred to as the 3-ton single-girder crane) is designed and manufactured according to the standard JB/T1306-94. The 3-ton electric single-girder crane is used with CDI, MDI and other forms of electric hoists to become A light and small crane running on rails, with a lifting capacity of 3 tons and an applicable span of 7.5-22.5 meters. The working environment temperature is in the range of -25-+40℃. Structural drawing of 3-ton single-girder bridge crane Technical parameters of 3 ton single girder craneCrane traveling mechanism | Working speed (m/min) | 20 ground | 30 ground | Room | Speed ratio | 58.78 | 39.38 | 26.36 | Motor | Type | YSE80₂-4 | YSE90L-4 | 7DR100-4 | Power | 2×0.8 | 2×1.5 | 2×1.5 | Rotational speed (r/min) | 1380 | Lifting mechanism (electric hoist) | Model of electric hoist | MD | CD | Lifting speed (m/min) | 8/0.8(7/0.7) | 8(7) | Lifting height H (m) | 6、9、12、18、24、30 | Traveling speed (m/min) | twenty | Motor | Cone squirrel cage mode | Working class | A3 | Electric current | 380V 50HZ three-phase | Width of rail | 37~70mm | LD type 3 ton single girder bridge crane parameter table
|